Cranes

General Requirements for Crane Marking

According to ICAO recommendations and most national regulations these following setups are usually required.

For most European countries Low Intensity Obstacle Lights Type A (HF10) or Type B (HF132) are used our obstacle lights are certified for this in France and Germany and are used worldwide. Cranes have to be marked in a way that the contour of the crane is visible. The distance of the lights shall not exceed 45m.

A crane aviation lighting system should haven an uninterruptible power supply. This hast to be in accordance with the local national requirements. From a practical experience we recommend to use a time of 72h, which covers a complete weekend.

To facilitate selection, we have created a configurator for the usual applications (TCS configurator).

Crane with elevated tower and less than 90m lenghth
Crane with elevated tower and less than 90m lenghth
Crane with elevated tower and 90m to 135m lenghth
Crane with elevated tower and 90m to 135m lenghth
Flat crane with less than 45m length
Flat crane with less than 45m length
Flat crane with 45m to 90m length
Flat crane with 45m to 90m length


Back…
next